Description
Klang-Performance für den neuen Mercedes Sprinter (ab Baujahr 2018 / W907/W910 – System passend für Fahrzeuge mit und ohne Verdunkelungsrollo):
Sprinter – Soundpaket 1 für Fahrzeuge mit Getränkehalter – 3-Wege Fahrerhaus-System
As an alternative to the mid-high modules on the A-pillars, the perfectly integrated mid-high module is available for the dashboard. Independent of the A-pillar panelling, the module is integrated to fit the storage compartment in the dashboard. The tweeter in the centre-tweeter panel has been angled. This special arrangement acoustically forms a so-called stereo triangle and ensures optimum sound dispersion. System only suitable for vehicles with REMIS blackout blind. Only suitable for models with cup holders on the left and right of the dashboard. For versions with cover flaps, the systems are suitable for the A-pillar.
The factory-fitted dominant centre speaker is throttled using the plug & play crossover included in the scope of delivery and blends harmoniously into the sound system.
A 165 mm JEHNERT power woofer is installed in each of the vehicle doors at the factory to ensure a powerful bass range. The woofers are installed with a custom-fit mounting adapter directly in the factory installation openings – mounting adapter included in the scope of delivery.
Note: Connection of the sound system is recommended via a DSP preparation, alternatively via the head unit (DSP preparation Mercedes code E3D).
The Sprinter sound package 1 for vehicles with cup holders includes the following components:
– 3-way sound system in anthracite (item no. 65740)
– Crossover for centre speaker integration
– Subwoofer of your choice (subwoofer list incl. dimensions) (subwoofer 17011 is supplied as standard if no specification is made)
– digital 5-channel amplifier “plug & play” incl. Sprinter sound setup / alternatively high-power amplifier
– Subwoofer connection cable “plug & play” 4.8 m
The digital 5-channel amplifier is extremely powerful and particularly versatile. It offers the possibility of the finest frequency programming with broadband frequency compensation as well as the transfer of frequencies and delay time corrections.
A specific setup has been developed for the Sprinter, which is pre-installed in every sound package. The compact 5-channel amplifier has a dynamically controlled switching power supply, which reduces heat generation and power consumption to an absolute minimum.
The amplifier can be selected in two power levels and offers the right power for every requirement (either 160 watts or 300 watts subwoofer output). For hi-fi purists, the high-power version 69741-82 with twice the power offers even greater sound dynamics.
Thanks to the amplifier, you can also add two multiboxes (e.g. for TV) to the system at any time later (see sound package 2).
Optional accessories:
An additional subwoofer controller is optionally available to control the subwoofer: (item no. 68495)
It is important to insulate the vehicle doors/side panelling accordingly; a corresponding insulation package is available for this purpose. This contains aluminium butyl and insulating fleece (item no. 27920)
An AUX connection is required to integrate a TV into the sound system of the Sprinter W907. A corresponding circuit board component can be provided on the amplifier so that the TV can be connected with a corresponding jack cable (item no. 11062-AUX jack standard).
It is also possible to connect an external Bluetooth module (item no. 68497) using a Y-adaption (item no. 68496), so that the sound system can also be used in standby mode without switching on the MBUX.
If only a Bluetooth connection is required, the Bluetooth module can be integrated directly into the standard-amplifier
(item no. 11062-BT-Standard)
A rocker switch is required to control these additional Bluetooth/AUX functions (item no. 69499)
Note for Hymer models:
To specifically facilitate the installation of the subwoofer under the front passenger seat, the installation kit can be used to optimise the ventilation pipe. The ventilation kit (art. no. 68492) enables easy installation of the subwoofer (17005).
To simplify connection of the amplifier / TV power supply, we recommend the power connection cable for Hymer models incl. factory-fitted DSP box for bridging the TV power supply.
Using the power connection cable (item no. 68491), the amplifier switches on automatically when the vehicle electrical system is activated, and the TV power is also taken over and does not need to be re-routed. The factory-fitted DSP box can therefore be uninstalled